Your R/C source in the heart of the Ozarks * 479-253-5539
Daddy Rabbit 1.5 / 98
by Jim Whitley
.61 2C engine / .91 4C engine
64.5" Wing Span
This is the updated 1968 version of the Daddy Rabbit, called either the Daddy Rabbit 98, or the Daddy Rabbit V1.5, it has been referred to both ways. It is an updated version of the the original Daddy Rabbit. It includes wood beam type engine mounts. Fuse doubler is 1/16" balsa, as per plans. Foam wing and stab included, both cut so ailerons and elevators are cut from sheeted wing. Wing tube version has wing tube hole cut in wing. Wing tube is not included in kit.
Your Daddy Rabbit 98 can be ordered in 4 different versions:
1) One piece wing, 2 cycle version
2) One piece wing, 4 cycle version
3) 3/4" wing tube mounted wing, 2 cycle version
4) 3/4" wing tube mounted wing, 4 cycle version
4 cycle version has wider firewall, and wider space between engine mounts to fit 4 cycle engine, and adds down thrust needed for 4 cycle engine. Firewall is lengthened to fit when moved back to accommodate 4 cycle engine.
It can also be ordered as a Fuse short kit only, no foam Wing or Stab
Two other options, applicable to any version include :
A) Set up with solid firewall, for use with a standard engine mount, no beam mounts or slots for mounts
B) Fuse doubler made from 1/16" PLY instead of balsa, which gives wing tube much more support.
The PDF files for the plans will be emailed to you, so you can have them printed.
copyright 2017 EAC